Boards will be here Monday.  Parts for stuffing
are on hand. Will build harnesses and stuff boards.
Will do end-of-wire to PICO board continuity chex.

There will be two assemblies. One using the ribbon
cable socket Chris favors (I used ribbon cable one
time on a LearJet program . . . turned out to be
#1 field failure risk . . . never again). I don't
stock any ribbon cable connectors so you're kinda
on your own with the first board.

Second board uses a Molex wire/board system I've used on
numerous programs.  I stock the parts for it.

There will be a 15-pin harness with 24" flying
leads for Ron as well.

I'll include some extra harness parts along
with matching crimp tools in case you need
to modify the supplied harness(es) or build
new ones.

Chris, can your 3D cad program suck in .DXF
files?  The envelope drawing has a D15
connector cutout definition that I didn't
dimension assuming you could capture the
.DXF details for your enclosure. The attached
.dxf file is an excerpt from a drawing
I did for a CNC panel fabrication.





Bob . . .